...
Condition | Description | ||
|---|---|---|---|
Destination Type | It specifies the destination where the connector mapping is to be done.
Note: By default, the Destination Type is model. | ||
Model | It is specifically dependent on Destination Type one chooses. If you choose another Destination Type, you will get that field label here. | ||
Note: Fields below this will only be enabled once user filled above two fields. | |||
Field | After choosing the second condition field, you will get this field visible in modal. If you chose Model as second condition field, this will be field and if you chose variable as second field, there will be variable. Note: It is invisible until you fill above 2 mapping fields. | ||
Operator | It is specifically operator value such as Set, Equals, Greater than, Equals than. Note: It is disabled until you fill above 3 mapping fields. | ||
Source Type | In this option, you can select various sources from which you want to display values.
Note:
| ||
Value | The available options will change depending on the selected source type. For example, if you choose "Static" as the source, you can provide a fixed static value. Note: It is disabled until you fill above 3 mapping fields. | ||
...